HONDA Outboard Motor BF150A - Manual (Page 36)

Improperly maintaining
this outboard motor, or
failing to correct a problem
before operation, can cause
a malfunction in which you
could be seriously hurt or
killed.
Always perform a
preoperation inspection
before each operation, and
correct any problem.
34
ARE YOU READY TO GET
UNDER WAY? Safety
Knowledge
IS YOUR OUTBOARD
MOTOR READY TO GO?
BEFORE OPERATION
Your safety is your responsibility. A
little time spent in preparation will
significantly reduce your risk of
injury.
Read and understand this manual.
Know what the controls do and how
to operate them.
Familiarize yourself with the
outboard motor and its operation
before you get under way. Know
what to do in case of emergencies.
Familiarize yourself with all laws
and regulations relating to boating
and the use of outboard motors.
Always wear a PFD (Personal
Flotation Device) while on the boat.
Attach the emergency stop switch
lanyard securely to your PFD or to
your wrist.
For your safety, and to maximize the
service life of your equipment, it is
very important to take a few
moments before you operate the
outboard motor to check its condition.
Be sure to take care of any problem
you find, or have your authorized
Honda marine dealer correct it,
before you operate the outboard
motor.
Before beginning your preoperation
checks, be sure the ignition switch is
in the OFF position.
05/02/22 14:30:37 31ZY6600_035