HONDA Outboard Motor BF150A - Manual (Page 65)

6.9 US qt (6.5 )
7.1 US qt (6.7 )
63
Oil Filter Change
SERVICING YOUR OUTBOARD MOTOR
OIL FILTER
OIL DRAIN GUIDE
RUBBER SEAL
FILTER WRENCH, 65 mm
Drain the engine oil, and reinstall
the drain plug and oil drain cover
(see Engine Oil Change on p.
).
Tilt the outboard motor, and place
a suitable container below the oil
drain guide to catch the used oil.
Use a suitable tool to remove the
oil filter, and throughly drain the
filter into the used oil container.
Install the oil drain plug cover.
Push the lever of the oil drain plug
cover in the direction pointed by
the arrow mark of ‘‘LOCK’’, and
install the oil drain plug cover so
that the locking lug securely sets
on the projection of the under
cover.
With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p.
)
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
With oil filter change:
Install the oil filler cap and tighten
it securely.
Install and lock the engine cover.
1.
2.
3.
6.
7.
8.
9.
61
61
05/02/22 14:34:58 31ZY6600_064