HP 7200 - Manual (Page 199)

Figure 3
5. Keep your fingers in the notch as you lower the lid back down until the lid is
almost closed.
6. Push against the top of the face plate (1) with your thumb as you pull the
bottom away from the right side of the HP All-in-One with your fingers, as
shown in Figure 4.
Use a slight twisting motion to help release the face plate on the right side.
Figure 4
1 Face plate
7. As shown in Figure 5, slide the face plate left (1) until the plastic catch on the
left side is not touching any part of the HP All-in-One, then pull the face plate
away from the device (2).
Chapter 16
196 HP Officejet 7200 All-in-One series
Troubleshooting
information