HP 7200 - Manual (Page 92)

Caution If you do not turn off the auto fax receive setting in your
computer modem software, your HP All-in-One will not be able to receive
faxes.
6. (Optional) Connect a phone to the other open phone port on the parallel splitter.
7. Now you need to decide how you want the HP All-in-One to answer calls,
automatically or manually:
–
If you set up the HP All-in-One to answer calls automatically, it answers all
incoming calls and receives faxes. Your HP All-in-One will not be able to
distinguish between fax and voice calls in this case; if you suspect the call is
a voice call, you will need to answer it before the HP All-in-One answers the
call.
To answer fax calls automatically, press the
Auto Answer button until the
light is on.
– If you set up the HP All-in-One to answer faxes manually, you must be
available to respond in person to incoming fax calls or your HP All-in-One
cannot receive faxes.
To answer fax calls manually, press the
Auto Answer button until the light is
off.
8. Run a fax test. For information, see Test your fax setup .
User Guide 89
Fax setup