HP 7200 - Manual (Page 113)

Tip You can also send two-sided originals by using the automatic document
feeder. For more information, see Send two-sided originals .
1. Make sure you have paper loaded in the input tray.
2. Press Setup , and then press 4 .
This selects Basic Fax Setup
3. Press until Two-Sided Fax Print appears, and then press OK .
Note This option only appears if you have an HP two-sided printing
accessory installed.
4. Press to select one of the following options:
–
If you want to print on one side of the page, select 1-Sided Output .
– If you want to print on both sides of the page, to select 2-Sided Output .
Note If you select 2-Sided Output , make sure you do not remove
the pages from the output tray before the HP All-in-One finishes
printing the fax. The HP All-in-One prints the front side of the page,
places it in the output tray, and then picks it back up to print the
opposite side. After both sides of every page have been printed, you
can remove the fax.
When you receive a fax and
2-Sided Output is selected, the HP All-
in-One will print black-and-white faxes with the top along the short
side of the paper, or portrait-style. The HP All-in-One will print color
faxes with the top along the long side of the paper, or landscape-style.
5. Press OK .
The HP All-in-One uses this setting to print all faxes.
Receive a fax manually
If you set up your HP All-in-One to receive faxes manually (the Auto Answer light is
off) or you answer the phone and hear fax tones, use the instructions in this section to
receive faxes.
You can receive faxes manually from a phone that is:
●
Directly connected to the HP All-in-One (on the "2-EXT" port)
● On the same phone line, but is not connected to the HP All-in-One
1. Make sure the HP All-in-One is turned on and you have paper loaded in the input
tray.
2. Remove any originals from the document feeder tray.
3. Set the Rings to Answer setting to a high number to allow you to answer the
incoming call before the HP All-in-One answers. Or, set your HP All-in-One to
answer faxes manually.
For information on setting the number of rings to answer, see
Set the number of
rings before answering . For information on setting the HP All-in-One to answer
faxes manually, see Set the answer mode .
4. Do one of the following:
–
If your phone is on the same phone line (but not plugged into the back of the
HP All-in-One) and you hear fax tones from a sending fax machine, wait 5 -
Chapter 11
110 HP Officejet 7200 All-in-One series
Use the
fax
features