HP 7200 - Manual (Page 170)

2. Press 7 , and then press 4 .
This selects Preferences and then selects Set Power Save Mode Time .
3. Press to select the appropriate time, then press OK .
You can choose 1, 4, 8, or 12 hours for the power save time.
Set the prompt delay time
The Prompt Delay Time option allows you to control the amount of time that passes
before a message prompts you to take further action. For example, if you press Menu
in the Fax area and the prompt delay time passes without you pressing another
button, the message "
Press Start Black or Color. " appears in the control panel
display. You can choose Fast , Normal , Slow , or Off . If you select Off , hints will not
appear on the control panel display but other messages, such as low ink warnings
and error messages, will still appear.
1.
Press Setup .
2. Press 7 , then press 3 .
This selects the Preferences menu and then selects Set Prompt Delay Time .
3. Press to select a delay time, then press OK .
Restore the factory defaults
You can change the current device settings to restore the factory defaults to what they
were when you purchased your HP All-in-One.
Note Restoring the factory defaults will not change the date information you
set, nor will it affect any changes you made to scan settings and the language
and country/region settings.
You can perform this process from the control panel only.
1.
Press Setup .
2. Press 6 , then press 3 .
This selects the Tools menu and then selects Restore Factory Defaults .
The factory default settings are restored.
Self-maintenance sounds
The HP All-in-One might make noises after long periods (approximately 2 weeks) of
inactivity. This is normal operation and is necessary to ensure the HP All-in-One
produces the best quality printouts.
User Guide 167
Maintain your HP
All-in-One