HP 7200 - Manual (Page 63)

Tip If the output is not borderless, then set the paper size to Letter
Borderless or A4 Borderless , set the paper type to Photo Paper , set the
Photo enhancement, and then try again.
For more information on setting the paper size, see Set the copy paper size .
For information on setting the paper type, see Set the copy paper type .
For information on setting the Photo enhancement, see Enhance light
areas of your copy .
Copy a photo several times on one page
You can print multiple copies of an original on one page by selecting an image size
from the
Reduce/Enlarge menu.
After you select one of the available sizes, you might be prompted whether you want
to print multiple copies of the photo to fill the paper you have loaded in the input tray.
To copy a photo several times on one page from the control panel
1.
Make sure you have paper loaded in the input tray.
Tip For the best quality when copying a photo, load photo paper in the
input tray.
2. Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3. In the Copy area, press Reduce/Enlarge until Image Sizes appears.
4. Press to select the size in which you want to copy the photo, and then press OK .
Depending on the image size you select, the Many on Page prompt might
appear to determine whether you want to print multiple copies of the photo to fill
the paper in the input tray, or just one copy.
Some larger sizes do not prompt you for a number of images. In this case, only
one image is copied to the page.
5. If the Many on Page prompt appears, press to select Yes or No , and then
press OK .
6. Press Start Copy Color .
Chapter 7
60 HP Officejet 7200 All-in-One series
Use
the copy features