Send a scan to a memory card – HP 7200 User Manual

Page 73

Advertising
background image

Share a scanned image with friends and relatives (network-connected)

Share a scanned image by pressing

Scan To

on the control panel. To use the

Scan

To

button, place an image face down on the glass, select a destination to which you

want to send the image, and start the scan.
Before you can share a scanned image on a network-connected HP All-in-One, you
must first have the HP Image Zone software installed on your computer. For more
information on installing the HP Image Zone software on your computer, see the
Setup Guide that came with your HP All-in-One.
1.

Load your original face down on the right front corner of the glass or (if you are
using the document feeder tray) in the document tray.

2.

In the Scan area, press

Scan To

.

The Scan To menu appears on the control panel display.

3.

Press to highlight

Select Computer

, and then press

OK

.

The

Select Computer

menu appears on the control panel display.

4.

Press to highlight the computer to where you want to send the scan, and then
press

OK

.

The Scan To Application menu appears.

5.

Press to highlight

HP Instant Share

, and then press

OK

.

6.

The image is scanned and sent to the computer you selected.

Send a scan to a memory card

You can send a scanned image as a JPEG image to the memory card that is currently
inserted in one of the memory card slots on the HP All-in-One. This enables you to
use the memory card features to generate borderless prints and album pages from
the scanned image. It also enables you to access the scanned image from other
devices that support the memory card.

Send a scan to a memory card loaded in your HP All-in-One (USB-connected)

You can send the scanned image as a JPEG image to a memory card. This section
describes the process when your HP All-in-One is directly connected to your computer
through a USB cable. Make sure you have a memory card inserted in the HP All-in-
One.
1.

Load the original face down on the right front corner of the glass.

2.

In the Scan area, press

Scan To

until

Memory Card

displays on the control

panel display.

3.

Press

OK

.

The HP All-in-One scans the image and saves the file to the memory card in the
JPEG format.

Chapter 8

70

HP Officejet 7200 All-in-One series

Use the

scan

features

Advertising
This manual is related to the following products: