HP BA322 90087 User Manual
Page 159
7.15 Installing and Configuring Layered Products (New Installations, Some
Upgrades)
The OpenVMS operating system kit includes several layered products. These include the System
Integrated Product (SIP) kits for the following products that are installed automatically:
•
Availability Manager (base) for OpenVMS (required)
•
CDSA for OpenVMS (required)
•
Kerberos for OpenVMS (required)
•
SSL for OpenVMS (required)
•
Performance Data Collector base software, TDC_RT (required)
•
HP Binary Checker for OpenVMS
•
WBEM Services for OpenVMS (OpenVMS Integrity servers only; required)
•
WBEM Providers for OpenVMS (OpenVMS Integrity servers only; required)
These layered products also include the SIP kits for the following products that you can install
optionally as part of the OpenVMS operating system installation:
•
DECwindows Motif for OpenVMS
•
DECnet-Plus for OpenVMS
•
DECnet Phase IV for OpenVMS
•
TCP/IP Services for OpenVMS
These layered products are included in the operating system media and can be installed using
either the steps shown in this section or the alternative procedure described in
. Other layered products—whether provided by HP on other CDs in the operating
system distribution, in the Software Product Library CD set, or on a CD provided by a third-party
company—should be installed using the steps shown in
.
In addition to the SIPs, the OpenVMS Integrity servers OE DVD includes kits for various products
that are part of the OpenVMS OEs. HP does not support installing these OE product kits while
booted from the OE DVD. To install these OE products, you must use the procedure described
in
.
As of Version 8.3, most PCSI kits included on the OpenVMS distribution media are signed using
Secure Delivery. Signed PCSI kits that are installed from the OpenVMS Integrity servers operating
system distribution media are validated. (Kits installed from the OpenVMS Alpha operating
system distribution CD are not validated; this restriction is due to space limitations of the
distribution CD.) On both OpenVMS Alpha and Integrity server systems, signed PCSI kits that
you install subsequently are validated (including signed kits on the distribution media).
NOTE:
To use menu option 3, the target system must have the identical version of the OpenVMS
operating system as the operating system media. If you need to install layered products on a
target system that has a different version of the operating system, use the alternative procedure.
To use option 3 of the operating system menu, follow these steps:
1.
Before you install any layered products, be sure you back up the system disk.
2.
If you are not already booted from the operating system media, shut down the system and
boot the operating system media. For instructions on how to shut down the OpenVMS
Integrity servers system, see
; for instructions on how to shut down
the OpenVMS Alpha system, see
.
3.
To view a list of products that can be installed, choose option 2 on the menu. If the layered
product that you want to install is not listed in the display, install the product by using the
alternative procedure described in
, or see the documentation you
received with the layered product. Note that HP does not support VMSINSTAL, PRODUCT
INSTALL, or other PRODUCT commands from the DCL option on the operating system
menu.
7.15 Installing and Configuring Layered Products (New Installations, Some Upgrades)
159