7 device-naming conventions – HP BA322 90087 User Manual
Page 28
(zip-compressed) file to your system. (To access the release notes, see
in the preceding
section.)
3.
Unzip the firmware file into the corresponding .ISO file. The .ISO file is a block copy of the
firmware disk for the Integrity servers system. On OpenVMS systems, you can obtain the
INFO-ZIP utility from an OpenVMS Freeware CD and use the UnZip utility provided with
INFO-ZIP. OpenVMS Freeware CDs are packaged with the OpenVMS for Integrity servers
OE DVD, and the files on the Freeware CDs are available online at the following website:
The following example shows the command for unzipping an .ISO image of the latest
firmware for an rx2600 system (the file name changes with each update of the firmware
available on the website):
$ UNZIP PF_CPEAKSYS0nnn.ZIP
Archive: SYS$SYSROOT:[SYSMGR]PF_CPEAKSYS0nnn.ZIP
inflating: PF_CPEAKSYS0nnn.ISO
4.
Record the data on the CD, specifying the .ISO file as the source for the CD. For instructions
on doing this, enter the following command:
$ @SYS$MANAGER:CDRECORD HELP
NOTE:
OpenVMS software includes the CD recording tool CDRECORD. For online help,
enter the @SYS$MANAGER:CDRECORD HELP command at the OpenVMS DCL prompt
as shown previously. For CDRECORD source files, check the OpenVMS Open Source Tools
CD supplied with your OpenVMS Integrity servers OE DVD. For more information about
the software, see the following website:
1.3.6.3 Updating Your Firmware from the Firmware Update CD
You update the firmware of an entry-class Integrity servers from the firmware update CD created
in the preceding section. For instructions, see the release notes provided for the firmware you
downloaded.
IMPORTANT:
To update Integrity servers firmware on cell-based servers, contact HP Customer
Support.
1.3.7 Device-Naming Conventions
When you perform specific operations, you are asked to specify a
for the source
drive and one for the target drive. When specifying those device names, note the following
naming conventions:
•
When the source drive is a local CD or DVD drive, the device name is similar to the following:
DQA0 (IDE drive) or DNA0 (USB drive)
For a device name, such as DQA0:, note the following conventions:
— DQ is the device code.
— A is the device controller designation.
— 0 is the unit number of the device.
•
When the target drive is a local disk, the device name is similar to the following:
DKA0:
28
Getting Started