HP BA322 90087 - Manual (Page 257)

If your system is listed with the proper port IP address and identification, you are ready to
provision. (HP SIM identifies such properties as the type of system, which in this case is MP, the
operating system and version, and the product name.) If your MP is not listed, perform a manual
discovery as described in the subsequent sections.
NOTE: If your iLO 2 MP is connected properly and turned on, HP SIM must discover it. If your
port is not discovered, check the LAN cable connections and proper port configuration. For more
information on these tasks, see the HP BladeSystem Onboard Administrator User Guide or the HP
Integrity iLO 2 MP Operations Guide. For information on discovery problems related to HP SIM,
see the HP SIM documentation.
D.1.5.2.1 Manually Discovering an MP with HP SIM
To enable HP SIM to manually discover the Integrity servers iLO 2 MP in HP SIM, use the
following procedure:
1.
Select Options —> Discovery, as shown in the following example:
D.1 HP SIM Provisioning of OpenVMS 257