HP BA322 90087 - Manual (Page 35)

The install operation can provide brief or detailed descriptions.
In either case, you can request the detailed descriptions by typing "?".
Do you always want detailed descriptions? (Yes/No) [No] NO
1 - HP I64VMS AVAIL_MAN_BASE V8.4 Layered Product
2 - HP I64VMS CDSA V2.3-306 Layered Product
3 - HP I64VMS DECNET_PHASE_IV V8.4 Layered Product
4 - HP I64VMS DECNET_PLUS V8.4 Layered Product
5 - HP I64VMS DWMOTIF V1.7 Layered Product
6 - HP I64VMS DWMOTIF_SUPPORT V8.4 Layered Product
7 - HP I64VMS HPBINARYCHECKER V1.0 Layered Product
8 - HP I64VMS KERBEROS V3.1-152 Layered Product
9 - HP I64VMS SSL V1.4-284 Layered Product
10 - HP I64VMS TCPIP V5.7 Layered Product
11 - HP I64VMS TDC_RT V2.3-1 Layered Product
12 - HP I64VMS WBEMCIM V2.96-A100211 Layered Product
13 - HP I64VMS WBEMPROVIDERS V2.0-4 Layered Product
14 - All products listed above
? - Help
E - Exit
Choose one or more items from the menu separated by commas: 9
NOTE: When you boot the OpenVMS operating system media and select the option to install
layered products, the installation procedure for the selected layered product(s) does not run the
Installation Verification Procedure (IVP) for layered products. Because the operating system is
booted from the media and the layered products are installed on a different device (the target
drive), the IVPs cannot execute correctly. However, you can run the IVP for each layered product
after you boot the target system (see the layered product installation documents for information
about running the IVP).
1.4.4 Using the Show Installed Products Option (4)
Use option 4 on the operating system main menu to display a list of products that have been
installed on a selected target disk by the PCSI utility. Products that were installed by VMSINSTAL
or other installation methods do not appear in this display unless they have been registered in
the PCSI utility’s product database.
The following is a sample display of the prompts and information that appear when you select
option 4. WBEM Services for OpenVMS and WBEM Providers for OpenVMS are available on
OpenVMS Integrity server systems only. The version numbers in this example do not necessarily
reflect the version numbers of the products actually shipped with OpenVMS Version 8.4.
You must enter the device name for the system disk for which
you want to display installed products.
If you enter an invalid device or one which is not a system disk
an error will occur.
(Enter "^" and press Return to return to main menu.)
Enter device name for system disk: [DKB300] (? for choices) DKB300
%MOUNT-I-MOUNTED, V84SYS mounted on _DKB300:
The default is an 80-column display that does not include
Maintenance (patches) or Referenced by information.
Do you want the full, 132-column display? (Yes/No) [No] NO
------------------------------------- ------------ ------------
PRODUCT KIT TYPE STATE
1.4 Using the Operating System Menu 35