Hitachi SA200 - Manual (Page 29)

2 Getting Started
SA200 17
2. Press and hold down the power button for several
seconds. The SA200’s sign-on message should appear
on the screen. You may have to adjust the brightness and
contrast controls for a clear display. See “LCD Display
Controls” on page 28.
3. If you need to run the BIOS Setup program to set or
modify your system’s configuration, refer to Appendix
B, “Using the BIOS Setup Program.”
Turning Your Laptop Off
1. To turn the laptop off, click on the Windows 95 Start
button (most often found at the lower left corner of the
screen) and point to Shut Down. A dialog box displays
giving you these options:
•
Shut down the computer?
•
Restart the computer?
•
Restart the computer in MS-DOS mode?
2. Click Yes to shut down the laptop.
3. Wait until the system powers down and then lower the
display. Gently press the top of the laptop to fasten the
open/close latch.
Resetting Your System
Occasionally, you may need to reset your system if you encounter
a hardware or software problem that locks up your laptop. Follow
these instructions to reset your system:
1. From Windows 95, press <Ctrl+Alt+Del>.
•
Never turn your laptop off suddenly!
Instead, close all programs and use the
Windows 95 Shut Down command before
turning your laptop off.
•
Always wait at least 5 seconds after turning
the laptop off before turning it back on!
lonestar.boo : sa200.fm Page 17 Friday, March 6, 1998 10:53 AM