Hitachi SA200 - Manual (Page 98)

B Using the BIOS Setup Program
86 SA200
Because the BIOS Setup program is menu driven, you can scroll
through the various submenus to make your selections.
When to Run the BIOS Setup Program
When you need to run your laptop’s BIOS Setup program depends
on your computing requirements.
When you turn on your SA200 for the first time, you may get a
message prompting you to run the BIOS Setup program. A
warning message may also appear on the screen if the hardware
configuration has changed or the laptop’s Power On Self Test
(your computer’s self-diagnostic test) fails. This message will
inform you of any errors or invalid settings and prompt you to run
the BIOS Setup program to correct the problem. For more
information on Power On Self Test (POST) errors, see “Power On
Self Test Error Messages” on page 83.
Even if you are not prompted by a message instructing you to use
the BIOS Setup program, you may eventually want to change your
laptop’s configuration. Following are some reasons why you may
want to run the BIOS Setup program:
•
You set up the computer for the first time and received
a message stating that you should run the BIOS Setup
program.
•
You want to reset the system clock.
•
You want to redefine the laptop’s communication ports
to prevent any conflicts.
•
You want to make changes to the laptop’s power
management configuration.
•
You want to change the password or make other
changes to the security setup.
lonestar.boo : sa200.fm Page 86 Friday, March 6, 1998 10:53 AM