Hitachi SA200 - Manual (Page 99)

B Using the BIOS Setup Program
SA200 87
Accessing the BIOS Setup Program
To access the BIOS Setup program, press <F2> while the laptop is
running through its Power On Self Test (POST). You can access
the BIOS Setup program just after you have turned on or reset the
laptop but before the laptop has launched the Windows 95
operating system.
Navigating the BIOS Setup Program
Both the menu bar and the help box assist you with navigating
through the BIOS Setup program.
The Menu Bar
The top of the BIOS Setup screen has a menu bar with the
following selections:
To select a BIOS Setup menu, press <
←
> or <
→
>.
Main Use this menu to make changes to the basic
system configuration.
Advanced Use this menu to make changes to
hardware settings on your system.
Security Use this menu to configure security
settings for your laptop.
Power Saving Use this menu to configure and enable your
laptop’s power management features.
Exit Use this menu to exit the current menu or
the BIOS Setup program.
lonestar.boo : sa200.fm Page 87 Friday, March 6, 1998 10:53 AM