HP 2420 - Manual (Page 170)

■ Light
■ Lighter
■ Lightest
■ Print Watermark
■ No (default)
■ All Pages
■ First Page Only
Job Storage tab features
Use the job storage feature to store print jobs in the HP LaserJet 2410, 2420, and 2430 printer
memory for printing at a later time. These job-storage features are described in the following sections.
The Job Storage tab appears among the driver tabs only if Job Storage is enabled. To support job-
storage features for complex jobs, or if you often print complex graphics, print postscript (.PS)
documents, or use many downloaded fonts, HP recommends that you install additional memory.
Added memory also gives you more flexibility in supporting job storage features. A minimum total
memory of 80 MB is required to use Job Storage features.
After additional memory is installed, the driver must be configured to reflect the changes in the
product.
Bidirectional communication is not supported in Windows 98, Windows Me, or Windows NT 4.0, the
operating environments that support the PS Emulation Driver. The driver must therefore be updated
manually.
To configure the driver manually after installing additional memory, follow these steps:
1 Click Start, select Settings, and then click Printers.
2 Right-click the product name, click Properties, and then click the Device Settings tab.
3 If additional memory has been installed, select Printer Memory: under Installable Options, and
then select the option that matches the amount of memory installed.
4 Click OK to make the printer job-storage features available.
NOTE To disable Job Storage, click Start, select Settings, and then click Printers. Right-
click the product name, click Properties, click the Device Settings tab, select Job Storage:,
and then select Disabled in the Change 'Job Storage' Setting dialog box that appears.
When Job Storage is disabled, the Job Storage driver tab is not visible.
Job Storage tab
The following illustration shows the Job Storage tab.
154 3 HP traditional print drivers for Windows
HP traditional drivers