HP 2420 - Manual (Page 228)

are available in the media-size list on the Advanced tab in the Document Defaults driver tabs. This
constraint prevents (or reduces the likelihood of) tying up the product with media-mount messages
that occur when users request sizes or types that are not available.
The trays listed in the Form to Tray Assignment setting include standard trays and optional
accessory trays. Generally, items that are installed separately have a separate Installable Options
setting. For example, for the HP LaserJet 2410, 2420, and 2430 printers, tray 3 is listed in both the
Form to Tray Assignment setting and the Installable Options setting.
The input trays listed here are also listed as media sources on the Paper/Quality tab.
Configuring the trays
1 Select the appropriate tray in the Form to Tray Assignment list.
2 Use the drop-down menu to select the media size (or form) that is loaded in that tray.
3 Repeat steps 1 and 2 for the remaining trays.
4 Click OK to enable your settings, or, if necessary, click the Cancel button to reconfigure all of the
trays, and remove the size and type constraints that have been imposed on the Paper/Quality
tab.
Font Substitution Table
Use the Font Substitution Table settings to install and remove external fonts for the product.
External fonts can be soft fonts or DIMM fonts.
Expanding the Font Substitution Table option causes a list of fonts to appear, as show in the
following illustration. Use the settings to change the TrueType-to-printer font mappings.
212 4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows
HP unidrivers