HP 2420 - Manual (Page 227)

Figure 4-18 Device Settings tab
The Device Settings tab contains controls for media-handling devices and controls for managing the
HP LaserJet 2410, 2420, and 2430 printers.
The Device Settings tab contains the following controls:
■ Form to Tray Assignment options
■ Font Substitution Table and External Fonts option
■ Postscript options (for the HP PS emulation driver only)
■ Installable Options options
Form to Tray Assignment
A network administrator can use Form to Tray Assignment to specify the media size in each input
tray.
The HP LaserJet 2410, 2420, and 2430 printers support more than one source of media. You can
assign a form (which defines the media size and margins) to each of your printer media sources.
When a form is matched to a source, you can select the form when you print. The product prints from
the tray to which that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the
media size that is loaded into each available input tray. The use of forms constrains the choices that
HP PCL 6, HP PCL 5e, and PS emulation unidriver features 211
HP unidrivers