HP 2420 - Manual (Page 201)

Figure 4-6 Front Cover options
The following Front Cover options are available:
■ Size is: drop-down menu
■ Add a Blank or Preprinted Cover check box
■ Source is: drop-down menu
■ Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes that you make to
the Size is: setting here override any previous Size is: settings made in other Use Different Paper/
Covers options.
When you select Front Cover, you must also select the Add a Blank or Preprinted Cover check
box to enable the setting. When you select this check box, the Source is: and Type is: drop-down
menus become available and a check mark appears next to the Front Cover option.
The Source is: setting specifies the source tray to use for adding a front cover to the document. The
list of source trays depends on the product accessories. Any optional media trays that are installed
through the Device Settings tab also appear here. For more information about the Source is:
setting, see the
Source Is section of this chapter.
The Type is: drop-down menu shows all of the media types that the product supports. For more
information about the Type is: drop-down menu settings, see the Type is: in the
Type is section of
this chapter.
HP PCL 6, HP PCL 5e, and PS emulation unidriver features 185
HP unidrivers