HP 2420 - Manual (Page 137)

Paper and envelope icons
The paper and envelope icons visually define width and height.
Dynamic measurement units
Use the dynamic measurement-units button to toggle the unit of measurement between standard
(inches) and metric (millimeters) units of measurement. The label on this button is dynamic,
depending on the measurement units that are in use. If the custom size currently shows the
measurements in inches, the button is labeled Use Millimeters. If the custom size currently shows
the measurements in millimeters, the button is labeled Use Inches. Click the button to switch
measurement-unit types.
Close
The Close button closes the Custom Paper Size dialog box according to the logic in the following
table. In all cases, any custom media sizes that are successfully saved (and not renamed or deleted)
while the dialog box is open will remain in the Size is: drop-down menu on the Paper tab. The
following table lists options that appear when you click the Close button.
Table 3-5 Close dialog box text strings
If the drop-down menu contains And the button says Then this happens when the Close
button is clicked
Untitled Save The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when the Custom
button was clicked.
<user-typed text> Save The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when the Custom
button was clicked.
<name of saved item> Delete The dialog box closes, and the current
media size is set to that which was last
shown in the drop-down menu.
<user-typed text> Rename The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when the Custom
button was clicked.
Use Different Paper/Covers
You can print books that are comprised of different media types using the Use Different Paper/
Covers options.
HP traditional PCL 6 and PCL 5e driver features 121
HP traditional drivers