Default print settings, Hp unidrivers – HP 2420 User Manual
Page 192
Use the Print Task Quick Sets setting to store the current combination of driver settings that appear
on all of the other print driver tabs (except the Advanced tab, where the setting is not available).
Print Task Quick Sets are either preset by network-administrator settings or user-defined printing
specifications (such as media size, pages per sheet, and so on). The Print Task Quick Sets control
does not appear on the driver Properties tabs.
NOTE
Administrators can predefine print task quick sets for their users. These administrator
print task quick sets are defined on the server and are available to users, but usually cannot
be modified by users. Users can also define print task quick sets for their own use. User-
defined print task quick sets are described later in this section.
The following selections are available in the Print Task Quick Sets drop-down menu:
■
Default Print Settings
■
User Guide Print Settings
Default Print Settings
When you select Default Print Settings, nearly all of the settings are restored to the combination
that existed after the driver was installed (the original settings). However, if the attribute combinations
that are associated with watermark definitions, custom media sizes, or the other quick sets have
been changed or deleted, the original settings for those items are not restored.
Type a new Quick Set name here appears in the Print Task Quick Sets menu automatically if no
other driver settings have been changed since the driver was installed, or if all of the driver settings
match the original settings. Otherwise, the setting in the Print Task Quick Sets menu is the same
label that appeared when you last closed the printing Properties dialog box by clicking OK.
The following table shows the default settings for Print Task Quick Sets. See the
section for information about preconfigurable driver settings.
Table 4-1
Print Task Quick Set default values for the HP LaserJet 2410, 2420, and 2430 printer
Driver feature
Feature setting location
Default values
for U.S. English
Print Task Quick
Sets
Default setting
for other
languages (if
different)
Correct Order
for Rear Bin
Finishing tab, Document Options
group box
Off
Yes
Print on Both
Sides
Finishing tab, Document Options
group box
Off
Yes
Flip Pages Up
Finishing tab, Document Options
group box
Unavailable; Off
when activated
Yes
Booklet Layout
Finishing tab, Document Options
group box
Unavailable; Off
when activated
Yes
Pages per Sheet Finishing tab, Document Options
group box
1
Yes
Print Page
Borders
Finishing tab, Document Options
group box
Unavailable; Off
when activated
Yes
Page Order
Finishing tab, Document Options
group box
Unavailable;
Right then
Yes
176
4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows
HP unidrivers