HP 2420 - Manual (Page 197)

NOTE Certain software programs can override the size command and specify different
media sizes within a single document.
For information about media sizes, see the Media attributes section of this guide.
Custom
The Custom Paper Size dialog box appears when you click the Custom button on the Paper/
Quality tab. The following illustration shows the initial appearance of the Custom Paper Size dialog
box.
Figure 4-5 Custom Paper Size dialog box
Name
Use the Name text box to type a new name for a custom media size.
The name that appears in the Name text box is one of three things, depending on the following
conditions:
■ If a saved custom media size has been selected from the drop-down menu on the Paper/Quality
tab, then the Name drop-down menu shows the name of the selected custom media size.
■ If a standard media size has been selected on the Paper/Quality tab, then the Name drop-down
menu shows the default name of "Custom."
■ If a new name has been typed into the Name text box for the purpose of saving a new size or
renaming an existing size, then that new name will remain in the text box until the new size is
saved or the dialog box is closed.
If you type a new name into the Name text box, but then do not click the Save button, you should be
able to change the width and height values without losing the name. However, if you close the dialog
box without clicking the Save button, any unsaved name or size values are lost without warning.
HP PCL 6, HP PCL 5e, and PS emulation unidriver features 181
HP unidrivers