HP 2420 - Manual (Page 205)

The following Last Page options are available:
■ Size is: drop-down menu
■ Source is: drop-down menu
■ Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes that you make to
the Size is: setting here override any previous Size is: settings that you made in other Use Different
Paper/Covers options.
The Type is: drop-down menu shows all of the media types that the product supports. For more
information about the Type is: drop-down menu settings, see the description for Type is: in the
Type
is section of this chapter.
NOTE You must use the same size of media for the entire print job. All Use Different Paper/
Covers options use the last Size is: setting that you select in any one of the Use Different
Paper/Covers options.
When you change the type and source of the media and covers, the settings you select
remain configured until you close the software program.
Back Cover
Use the Back Cover options to include a blank or preprinted back cover on a document, or to
include a back cover from a source tray that is different from the one used for the remainder of the
document.
The following illustration shows the Back Cover setting and options.
Figure 4-10 Back Cover setting
HP PCL 6, HP PCL 5e, and PS emulation unidriver features 189
HP unidrivers