HP 2420 - Manual (Page 209)

Resizing options
The Resizing Options group box consists of the following controls:
■ Actual Size (default)
■ Print Document On setting
■ Scale to Fit check box
■ % of Normal Size setting
Actual Size
Actual Size is the default setting. It prints the document without changing the document size.
Print Document On
Select the Print Document On radio button to format the document for one media size and then
print the document on a different media size, with or without scaling the image to fit the new media
size.
The Print Document On control is disabled by either of the following conditions:
■ The % of Normal Size value is not 100.
■ The Pages per Sheet value (on the Finishing tab) is not 1.
When Print Document On is selected, the drop-down menu shows the media sizes on which you
can print. The list contains all of the standard media sizes that are supported by the selected media
source and any custom sizes that you have created. When Print Document On is selected, Scale
to Fit is automatically selected. Clear this check box if you do not want your document reduced or
enlarged to fit on the selected media size.
Scale to Fit
The Scale to Fit check box specifies whether each formatted document-page image is scaled to fit
the target media size. By default, Scale to Fit is selected when Print Document On is selected. If
the setting is turned off, then the document page images will not be scaled, and are instead centered
at full size on the target media. If the document size is larger than the target media size, then the
document image is clipped. If it is smaller, then it is centered within the target media. The following
illustration shows preview images for a document formatted for Legal-size media with the Print
Document On check box selected, and the target size specified as Letter.
Figure 4-12 Preview images - Legal on Letter; Scale to Fit off (left) and on (right)
HP PCL 6, HP PCL 5e, and PS emulation unidriver features 193
HP unidrivers