Figure 8-1 wan interface board handles – HP 480-0005-00-15 User Manual
Page 155
Advertising
P/N 480-0005-00-15
8-15
Chapter 8: Diagnostics/Maintenance
Figure 8-1 WAN Interface Board Handles
6. With the handles in the open position, slide the new card firmly into the slot until the card feels engaged.
7. Push on the inserter/extractor handles in toward each other to the closed position to lock the card in place
8. Turn the power switch to on and the blue LED will light momentarily and extinguish.
9. Re-tighten the handle anchoring screws, one in each handle with a #1 Phillips screwdriver.
Open position
Closed position
Side View
Side View
Front View
TM
Hot Swap
DS1
Status
Alarm
1
2
PCI
CPU
Bank
DSP
1
2
TX/RX
Link
1
2
3
4
5
6
7
8
10/100
Ethernet
Span
Status
TECHNOLOGIES,
INC.
Q
UINTUM
TM
Advertising