HP 480-0005-00-15 - Manual (Page 83)

P/N 480-0005-00-15 3-20
Chapter 3: Installation
14. Enter a password. The default password is admin. To change this password later, see Chapter 4: Getting
Started with Command Line Interface (CLI). Questions about the chassis will scroll on the screen.
15. You will be asked to configure an Ethernet port. Enter Y to configure the Ethernet port.
NOTE: If you are unsure of the following values, contact your network administrator.
16. For IP address, enter the IP address for the Tenor CMS chassis.
17. For Subnet Mask for LAN prompt, enter the subnet mask. This address is used to differentiate the network
portion of the IP address from the host portion of the IP address.
18. For Default Gateway, choose whether there should be a default gateway (router) which routes packet data
outside of your LAN, and enter its IP address.
The CMS will automatically reboot with the new IP address.