Hitachi Koki USA DDC 35n - Manual (Page 43)

3.2 IP Peer-to-Peer Printing Program
3-5
Util
iz
ing W
indow
s P
rogr
am
s
Cha
p
ter 3
3.2 IP Peer-to-Peer Printing Program
This section describes how to set up and use the IP Peer-to-Peer
Printing program. With the setup procedure, you set up your print
server ports for printing from a Windows environment.
3.2.1 Installing the IP Peer-to-Peer Printing
Program
Use the following procedure for automatic installation of the IP Peer-
to-Peer Printing Program. If the opening screen does not appear as
described in step 1, follow the instructions for the manual installation
procedure.
1.
Insert the CD-ROM into your workstation’s CD-ROM drive. The
opening screen appears automatically.
2. Click the CD-ROM Contents button to display the Introduction
screen.
3. Click Installation/Configuration Programs located at the bottom
of the Introduction screen.
4. Select the program that you want to install and follow the instruc-
tions displayed on the screen.
You can use the following procedure to manually install the IP Peer-to-
Peer Printing program.
1.
Insert the CD-ROM into your workstation’s CD-ROM drive.
2. Run the program. (In this example, we assume that D: is drive
your workstation’s CD-ROM drive.)
D:\Ip-P2p\Setup.exe
3.1 Discovery Program – Management Access Program (MAP)