Configure in bindery mode with pconsole -11, 2 configure in bindery mode with pconsole – Hitachi Koki USA DDC 35n User Manual
Page 65
4.2 Configuring NetWare 4.x — Bindery Emulation
4-11
NetW
ar
e Confi
g
u
ra
tio
n
C
hapt
er
4
Note
4.2.2 Configure in Bindery Mode with
PCONSOLE
Once you confirm the server has Bindery Context, use the following
procedure to configure the NIC.
1.
Log into the network as ADMIN.
2.
Type
PCONSOLE
and press
. The following screen appears.
3.
When the
Available Options
menu appears, press
(for the
Bindery Mode).
Note
4.
From the
Available Options
screen, select
Quick Setup
and press
.
• The command at the console prompt takes effect immediately. The def-
inition in the autoexec.ncf file takes effect when the server is shut
down and then restarted.
Available Options
Print Queues
Printers
Print Drivers
Quick Setup
Change Context
• If you receive a message asking you to login to a server with Bindery
connections, the server you are attached to does not have Bindery
Mode enabled. Follow the procedures in 4.2.1 Confirm Bindery Con-
text or log onto a server with Bindery Services activated.
Enter
F4
Enter