Hitachi Koki USA DDC 35n User Manual
Page 45
3.2 IP Peer-to-Peer Printing Program
3-7
Util
iz
ing W
indow
s P
rogr
am
s
Cha
p
ter 3
Max Hops for Search:
Type in a maximum hop value. The initial default value is 2. See
the note under 3.1.2 Configuring the MAP for an explanation about
maximum hops.
IP Port Base:
This is the starting port number for the printserver. The default is
10000 (corresponding to a TCP/IP port of 10001) but you can
change it if you need to.
Printer Names:
These settings let you select what format to use when displaying
the printer list.
Based on Serial Numbers
Select this option to identify printers according to printer server
serial number. If SN991354 is the printer serial number, for exam-
ple, SN991354 is the printer port.
Based on IP Address
Select this option to identify printers according to IP address. If
199.99.92.99 is the printer IP address, for example, 199.99.92.99 is
the printer port.
Based on DNS (Domain Name Server)
Select this option to identify printers according to DNS name.
Example:
<PTR-MKTG.DOMAIN.COM>.
Based on Unit Name
Select this option to identify printers according to unit name.
Example:
<MLT_999999>.
4.
After the settings are the way you want, click
OK
to set them and
close the dialog box.