Protective cover, To remove the cover, To reattach the cover – Handspring Visor User Manual
Page 16
Advertising
Page 16
Introduction to Your Visor™ Handheld
Protective cover
The cover protects the Visor handheld screen when it is not in use.
To remove the cover:
1. Unclip the top of the cover from your handheld.
2. Lift the cover off your handheld.
To reattach the cover:
1. Insert the pegs on the bottom of the cover into the holes on the
bottom of your handheld.
2. Gently press the top of the cover onto your handheld until it clicks
into place.
Unclip top edge to
remove cover
Align pegs to
replace cover
Advertising