Handspring Visor - Manual (Page 234)

Page 234 Setting Preferences for Your Handheld
3. Tap the command you want from the Command list. If the
command requires additional information, a field appears to the
right of it for you to enter the information. The following
commands are available:
Wait For Tells your handheld to wait for specific
characters from the TCP/IP server before
executing the next command.
Wait For
Prompt Detects a challenge-response prompt from the
server and displays a dynamically generated
challenge value. When you enter the challenge
value into your token card, this generates a
response value for you to enter on your
handheld. This command takes two arguments,
separated by a vertical bar (|) on the input line.
Send Transmits specific characters to the TCP/IP
server to which you are connecting.
Send CR Transmits a carriage return or LF character to the
TCP/IP server to which you are connecting.
Send User ID Transmits the User ID information entered in the
User ID field of the Network Preferences screen.
Send
Password Transmits the password entered in the Password
field of the Network Preferences screen. If you
did not enter a password, this command
prompts you to enter one. The Password
command is usually followed by a Send CR
command.
Tap here