Handspring Visor - Manual (Page 201)

Chapter 8 Page 201
Performing an IR HotSync operation
After you complete the steps to prepare for an IR HotSync operation
it is easy to perform the actual operation.
To perform an IR HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap Local.
4. Tap the pick list below the HotSync icon and select IR to a PC/
Handheld.
5. Position your handheld’s IR port within a couple of inches of your
computer’s infrared port.
6. Tap the HotSync icon to start the IR HotSync operation.
Returning to serial cradle HotSync operations
It’s easy to return to using the cradle for HotSync operations.
Note: If you’re using a USB cradle and the Local USB option is
already selected on the HotSync Manager menu, you don’t
need to do anything to return to cradle operations.
To return to serial cradle HotSync operations with Windows 98 and Me:
1. If needed, connect the cradle to your computer.
2. Click the HotSync Manager icon in the Windows system tray.
3. Choose Setup, and then click Local.
4. In the Serial Port list, select the COM port where your cradle is
connected.
5. Click OK.