Handspring Visor - Manual (Page 198)

Page 198 Advanced HotSync® Operations
The COM port displayed on this screen is the port associated
with your infrared device. It should be different from the port
currently defined for cradle synchronization.
5. Write down the port listed as “Providing application support” so
you can configure HotSync Manager for infrared communication.
This port is the simulated port. It is the channel through which
the actual infrared communication takes place between your
computer and your handheld.
6. Deselect all other check boxes in the Options tab.
7. Click Apply and then click OK.
To enable infrared communication with Windows 2000:
1. Click the HotSync Manager icon in the Windows system tray
(bottom-right corner of the taskbar).
2. Choose Exit to close HotSync Manager.
3. In the Windows taskbar click Start, choose Settings, and then
choose Control Panel.
4. Double-click the Wireless Link icon.
5. Click the Image Transfer tab and deselect the Use Wireless Link to
transfer images from a digital camera to your computer check box.
Infrared
ports