Husky 2000PSI User Manual

Page 18

Advertising
background image

18

4.3

USE OF CLEANING DETERGENTS

CAUTION:

Only use cleaning detergents

recommended for pressure washers.
CAUTION:

Fill and flush the detergent

tanks with clear water after use.

4.3

USO DE DETERGENTE

ATENCIÓN

CAUTION

Fig. 10

1. Remove the tank caps (1-2) located on the back of

the machine. (Fig. 10)

2. Fill the tanks with suitable cleaning solution. Use

only approved pressure washer cleaners. Do not

use bleach, chlorine, or any cleaners containing

acids (Fig.10).

NOTE: Tank #1 is removable and can be released

by shifting left or right and then pulling out.

3. Turn dial (3) to choose the desired tank and increase/

decrease detergent flow(Fig.9).

4. Set the Click-N-Clean

TM

to the “Detergent Spray“

position. The detergent will automatically be mixed

with the water and discharged through the nozzle.

NOTE: WHEN THE Click-N-Clean

TM

NOZZLE IS

MOVED TO THE HIGH PRESSURE OR MEDIUM
FAN SPRAY POSITION, DETERGENT WILL NOT
BE DISCHARGED.

Fig. 9

El aparato incorpora dos depósitos de detergente

Dial-N-Wash

®

.El dosificador de detergente (3-Fig. 9)

se utiliza para seleccionar entre ambos depósitos de

detergente (1-2-Fig. 9) y para dosificar la cantidad

de detergente.

This product is equipped with dual Dial-N-Wash

®

detergent tanks. The dial (3-Fig. 9) is used to control

the suction between detergent tanks (1-2-Fig. 9) and

increase/decrease detergent flow.

CUIDADO:

Use tan solo detergentes específicos

para máquina de lavar a presión.
CUIDADO:

Limpie con agua clarificada el

estanque luego de haber utilizado productos

químicos.

1. Retire los tapones de los depósitos (1-2) situados

en la parte trasera de la máquina. (Fig. 10).

2. Llene los depósitos con la solución de limpieza ade-

cuada. Utilice sólo agentes limpiadores para limpieza

a presión homologados. No utilice lejía, cloro ni

ningún limpiador que contenga ácido (Fig.10).

NOTA: El Depósito #1 es desmontable y, para

sacarlo, sólo tiene que girarlo a la izquierda o a

la derecha y extraerlo.

3. Gire la rueda (3) para elegir el depósito deseado y

aumentar/disminuir el caudal de detergente (Fig. 9).

4. Ajuste la lanza Click-N-Clean

TM

a la posición de

“Pulverización con detergente”. El detergente

se mezclará automáticamente con el agua y se

descargará a través de la boquilla.

NOTA: CUANDO LA BOQUILLA Click-N-CleanTM

SE COLOCA EN LA POSICIÓN DE PULVERIZA-
CIÓN EN ABANICO A ALTA PRESIÓN O A MEDIA
PRESIÓN, NO SALDRÁ DETERGENTE.

Advertising