Document Outline

• Record of Revisions
• Service Bulletin List
• List of Effective Pages
• Table of Contents
• List of Figures
• Introduction
  • 1. Manual Usage
    • A. General
    • B. Application
  • 2. Model Descriptions
    • A. Dongle DGL-1 Programming Adapter
      • Figure 1. DGL-1 (Dongle) Programming Adapter with ELT Cover
  • 3. Approvals
    • A. Dongle DGL-1
  • 4. List of Acronyms, Abbreviations, and Definitions
  • 5. References
    • A. Regulatory Documents
    • B. Other Documents
• Description and Operation
  • 1. Description
    • A. Functional Overview
    • B. Components
      • Figure 2. DGL-1 (Dongle) Programming Adapter Assembly
    • C. 24-Bit Address Reprogramming Functionality
  • 2. Operation
    • A. Operational Overview
  • 3. Specifications
    • A. Electrical
      • Table 1. Electrical Specifications
    • B. Physical
      • Table 2. Physical Specifications
• Test and Fault Isolation
  • 1. General
    • A. Applicability
    • B. Regulatory Requirements
  • 2. Inspection
    • A. Periodic Inspection
  • 3. Test Procedures
    • A. General
    • B. 24-Bit Address Reprogramming Verification Test
    • C. 15-Digit Hex ID Verification
  • 4. Fault Isolation
    • A. Troubleshooting Guidelines
      • Table 3. Troubleshooting Guide
• Removal
  • 1. DGL-1 Programming Adapter
    • A. Dongle Removal
      • Figure 3. Dongle Removal Sequence
  • 2. Material or Equipment Return
    • A. Shipment Information
    • B. Return Material Authorization
• Installation
  • 1. Regulatory Requirements and Guidelines
    • A. Applicability
    • B. TSO C126, Paragraph D
    • C. FAA
    • D. Canada
    • E. Other Countries
    • F. RTCA
  • 2. Mechanical
    • A. Dongle Location
    • B. Dongle Installation
      • Figure 4. Dongle Outline and Dimensions
  • 3. Wiring
    • A. General Considerations and Recommendations
    • B. Dongle Wiring
      • Figure 5. Dongle Wiring Harness Arrangement
      • Figure 6. Molex 12-Pin Connector Harness Arrangement
      • Figure 7. Molex Power and Ground Wires
      • Figure 8. Dongle Wiring Diagram
    • C. 24-Bit Address Reprogramming
      • Figure 9. Octal/Hexadecimal to Binary Conversion
      • Figure 10. 24-Bit Address Switch Block
• Illustrated Parts List
  • 1. Introduction
    • A. Purpose
    • B. IPL Usage Guide
  • 2. Manufacturer Name and Address
    • A. Ordering Information
  • 3. Explanation of Detailed Parts List Entries
    • A. Fig # & Item Column
    • B. Part # Column
    • C. Nomenclature Column
    • D. UPA (Units Per Assembly) Column
  • 4. Detailed Parts List
    • Figure 11. DGL-1 (Dongle) Programming Adapter Assembly
    • Figure 12. Wire Harness