ACR&Artex DGL-1 - Manual (Page 14)

ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
DGL-1, DONGLE (453-4010)
25-69-01
Page 14 of 44
JUN 27/12
configuration or a navigation interface, should be installed and maintained in accordance with
the written instructions specific to the accessory.
NOTE: Contact ACR Electronics, Inc., for optional accessories approved for use with a
ME406 Series ELT.
(5) To ensure proper operation, only parts listed in the Illustrated Parts List of this manual or
those recommended by ACR Electronics, Inc., may be used as replacement parts for the
Dongle.
TASK 25-62-30-990-801
2. Model Descriptions
SUBTASK 25-62-30-990-001
A. Dongle DGL-1 Programming Adapter
(1) The Dongle is a 24-bit address programming adapter with two rows of DIP switches.
(2) The Dongle is an optional auxiliary device attached to an ELT top cover that remains with an
aircraft to allow fleet operators to transfer ELTs between aircraft.
Figure 1. DGL-1 (Dongle) Programming Adapter with ELT Cover
TASK 25-62-30-990-803
3. Approvals
SUBTASK 25-62-30-990-001
A. Dongle DGL-1
(1) FAA TSO-C126 - System Component
(2) ETSO 2C126 - System Component
DGL-1 DONGLE
PROTECTIVE COVER