C. 24-bit address reprogramming functionality – ACR&Artex DGL-1 User Manual
Page 20
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
DGL-1, DONGLE (453-4010)
25-69-01
Page 20 of 44
JUN 27/12
SUBTASK 25-69-01-870-003
C. 24-Bit Address Reprogramming Functionality
CAUTION:
THE PROGRAMMING AND LABELING OF THE ELT MUST MATCH THE AIRCRAFT IN
WHICH IT IS INSTALLED. REMARK THE ELT PRODUCT LABEL AS NECESSARY TO
REFLECT NEW PROGRAMMING AND/OR COUNTRY OR REGISTRY. CONTACT THE
LOCAL REGULATORY AUTHORITIES RESPONSIBLE FOR ELT REGISTRATION AND
REFER TO THE APPLICABLE ELT ABBREVIATED COMPONENT MAINTENANCE MANUAL
FOR ELT REGISTRATION REQUIREMENTS.
(1)
The Dongle provides the means to reprogram ELTs with 24-bit address location protocol
programming.
(2)
This capability facilitates swapping ELTs from one aircraft to another when performing routine
maintenance, etc., without losing a significant amount of time reprogramming ELTs.
(3)
If the ELT is not programmed with a 24-bit address location protocol, the Dongle will not
reprogram the ELT.