Fujitsu Siemens Computers P1610 - Manual (Page 10)

10
L i f e B o o k P 1 6 0 0 N o t e b o o k B I O S
Serial/Parallel Port Configurations Submenu of the Advanced Menu
The Serial/Parallel Port Configurations submenu is for setting the address and interrupt of the touch panel. Note that
this submenu only appears when Microsoft Windows XP Pro is installed as the operating system. If Windows XP
Tablet PC Edition is installed, this submenu is not available.
.
Figure 4. Serial/Parallel Port Configurations Submenu
Table 4: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu
Menu Field Options Default Description
Touch Panel: ■ Disabled
■ Enabled
■ Auto
[Enabled] Enables or disables the system touch panel, or allows the Plug &
Play OS to configure it.
Base I/O
Address/IRQ: ■ 3F8/IRQ 4
■ 2F8/IRQ 3
■ 3E8/IRQ 4
■ 2E8/IRQ 3
[3F8/IRQ 4] Selects the base I/O address and interrupt for the touch panel port.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
[Disabled]
The touch panel is
disabled.
[Enabled]
The touch panel is
enabled with user
configuration.
[Auto]
Plug & Play OS
configure the touch
panel.
Serial/Parallel Port Configurations
Touch Panel:
Base I/O Address/IRQ: [3F8/IRQ 4]
[Enabled]