Security menu - setting the security features – Fujitsu Siemens Computers P1610 User Manual

Page 19

Advertising
background image

19

SECURITY MENU - SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration.
Follow the instructions for Navigating Through the
Setup Utility to make any changes.

The following tables show the names of the menu fields
for the Security menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.

Figure 12. Security Menu

If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access to
your secured functions and data.

If you make an error when re-entering
the password a [Warning] will be
displayed on the screen. To try again,
press the Enter key and then retype the
password. Press the Esc key to abort the
password setting process.

Entering a password incorrectly three
times in a row will cause the keyboard
and mouse to be locked out and the
warning [System Disabled] to be
displayed. If this happens, restart the
computer by turning off and on the
power with the power switch and use
the correct password on reboot.

If the Password on Resume is Enabled
and the Password on Boot is Disabled
you will not have to type your password
upon resuming the system from the
Standby or Hibernate modes. Power
Management Security will work only if
Password on Boot is enabled.

F1

Help

ESC

Exit

Select Item

Select Menu

-/Space

Enter

F9

Setup

Defaults

F10

Save and Exit

Change Values

Select Sub-Menu

Main Advanced

Security

Boot

Info Exit

Item Specific Help

Press <Enter> key to

set Supervisor Password

to enable any password

features.

Then password entry is

required to enter BIOS

Setup.

PhoenixBIOS Setup Utility

Supervisor Password Is:

Clear

User Password Is:

Clear

Set Supervisor Password

[

Enter

]

Set User Password

[Enter]

Minimum User Password Length

[0]

Password on Boot:

[Disabled]

On Automatic Wake up:

[Disabled]

KB Lock on Resume:

[Disabled]

Boot from Removable Media:

[All]

Flash Write:

[Enabled]

Hard Disk Security

Owner Information

Security Chip Setting

Security Panel on Resume:

[Enabled]

▲▲

S e c u r i t y M e n u

Advertising