Fujitsu Siemens Computers P1610 - Manual (Page 7)

7
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [
Esc ] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
LBA Mode
Control: ■ Disabled
■ Enabled
[Enabled] The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Enables or disables Logical
Block Addressing in place of Cylinder, Head, Sector addressing.
Transfer Mode: ■ Standard
■ Fast PIO 1
■ Fast PIO 2
■ Fast PIO 3
■ Fast PIO 4
■ Multiword DMA 1
■ Multiword DMA 2
[Multiword
DMA 2] The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Selects the method for mov-
ing data to/from the drive. Autotype the drive to select the optimum trans-
fer mode.
Ultra DMA
Mode: ■ Disabled
■ Mode 0
■ Mode 1
■ Mode 2
■ Mode 3
■ Mode 4
■ Mode 5
[Disabled] The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Selects the method for mov-
ing data to/from the drive. Autotype the drive to select the optimum trans-
fer mode.
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field Options Default Description
M a i n M e n u