Exiting from the security menu – Fujitsu Siemens Computers P1610 User Manual
Page 20
20
L i f e B o o k P 1 6 0 0 N o t e b o o k B I O S
Exiting from the Security Menu
When you finish setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. To exit from setup utility, press [
Esc
] key to go to Exit Menu. To move to another menu, use the cursor
keys.
Table 12: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor Password is:
–—
Clear
A display-only field. Set is displayed when the system supervisor password
is set and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general user password is set,
and Clear when it is not.
Set Supervisor Password
–—
[Enter]
Sets, changes or cancels the Supervisor Password. The Supervisor Pass-
word may be up to seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. To cancel a
password press the
Enter
key instead of entering characters in the Enter
New Password field and in the Re-enter New Password field. When a
Supervisor Password is set it must be used to access the BIOS setup utility.
Set User Password
–—
[Enter]
Can only be accessed if Supervisor Password is set. Sets, changes or can-
cels User Password. User Password may be up to seven characters long
and must include only letters or numbers (no symbols). Passwords are
NOT case-sensitive. To cancel a password press [
Enter]
key instead of
entering characters in the Enter New Password and Re-enter New Pass-
word fields. When a User Password is set it must be used to access the
BIOS utility.
Minimum User
Password Length:
–—
[0]
Can only be accessed if Supervisor Password is set. Set the minimum
length for User Password.
Password on Boot:
■
Disabled
■
First Boot
■
Every Boot
[Disabled]
When Disabled, no password is required. When set to First Boot, password
entry required only before first boot. When Every Boot is selected, pass-
word required whenever the system is booted.
On Automatic Wake Up:
■
Disabled
■
Enabled
[Disabled]
When disabled, password entry is not required on automatic wake-up on
LAN or RTC. When enabled, password entry is required on automatic
wake-up on LAN or RTC.
KB Lock on Resume:
■
Disabled
■
Enabled
[Disabled]
When Enabled, PS/2 keyboard or mouse inputs are locked out at Resume
From Standby or Hibernate modes until entering password.
Boot from
Removable Media:
■
All
■
Supervisor
only
[All]
When Supervisor Only is selected, only the Supervisor can boot from
removable media. Only the user who enters the Supervisor Password
before OS boot is treated as the Supervisor. When All is selected, boot
from removable media is not restricted.
Flash Write:
■
Disabled
■
Enabled
[Enabled]
When disabled, the BIOS Flash Memory is write-protected; when enabled,
it is not.
Hard Disk Security:
–—
–—
When selected, opens the Hard Disk Security submenu, which allows you
to configure hard disk security features.
Owner Information
–—
–—
When selected, opens the Owner Information submenu, which allows you
to set Owner information.
Security Chip Setting
___
___
When selected, opens the Security Chip Settings submenu, which allows
you to set settings for the security chip.
Security Panel on Resume:
■
Disabled
■
Enabled
[Enabled]
When enabled, the Security Panel feature is enabled upon Resume from
Suspend.