Fujitsu Siemens Computers P1610 - Manual (Page 21)

21
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Figure 13. Hard Disk Security Submenu
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Default Description
Drive0 Password
Is: Clear A display-only field. Set is displayed when the Drive0 Password is set and Clear when it is not.
Set Drive0
Password [Enter] Sets, changes or cancels Drive0 Password. The Drive0 Password may be up to seven characters
long and include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To can-
cel a password press the Enter key instead of entering characters in the Enter New Password field
and in the Re-enter New Password field. When a Drive0 Password is set it must be used to access
the hard disk. Data on the hard disk cannot be read on other systems.
Password Entry
on Boot: [Enabled] When set to Disabled, it is not necessary to enter a Hard Disk Password before booting the OS.
The hard disk is still password-protected without password entry.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
Hard Disk Security
Drive0 Password Is: Clear
*Set Drive0 Password: [Enter]
Password Entry on Boot: [Enabled]
*Hard Disk Password cannot be set or changed
if the system is rebooted from OS. Choose "Save
Changes and Power Off" in Exit Menu to shut down
the system, then Hard Disk Password can be set
or changed on next boot.
When set to disabled,
Hard Disk Password
entry is not required
before OS boot.
The hard disk is still
password-protected
without password entry.
S e c u r i t y M e n u