Foster Gas Cooker Hobs 9606801 - Manual (Page 10)

28
ENGLISH
INSTALLER INSTRUCTIONS
Set hook B in frame A welded to the hob,
making sure that it is blocked in the spe-
cific holes based on top thickness (for a
30 mm thick top, lock the hook in the the
highest hole in the frame; for a 40 mm thick
top, block the hook in the lowest hole of the
frame).
Rotate tongue CA until it is positioned
above the top, then tighten screw D.
B A
C D
30
B A
C D
40
7.2 Sliding hooks
Make it possible to fasten the cooker hob without pre-set fastening points.
Standard edge (8 mm)
A
B
C
Flush-mount edge - Q4 (only for S4000 series)
A B C
Insert hook B in the sliding guide CA.
Manually lock the hook using screw A.