Foster Gas Cooker Hobs 9606801 - Manual (Page 6)

24
ENGLISH
INSTALLER INSTRUCTIONS
ENGLISH
5. First installation
Do not leave packaging material waste unguarded in the household environment.
Separate the various packaging waste materials and deliver them to the
closest selective waste collection centres.
In order to remove all manufacturing residues, we recommend cleaning the appliance.
For further information on cleaning see Chapter 15
[ Page 37] .
6. Positioning in the work top
The following interventions require masonry and/or carpentry work and must there-
fore be completed by a competent technician. Installation can be completed on dif-
ferent materials, such as masonry, metal, solid wood and plastic laminated wood, as
long as it is heat resistant (T 100°C).
6.1 Installation on the support structure (worktop) of a traditional built-in
cooker hob (8 mm edge, Q4 edge, semi-flush edge)
Cut an opening on the top surface of the
cabinet with the dimensions and position
indicated here below and represented in
the drawing [ Fig. 2 ].
The dimensions of the built-in hole are
shown in the Gas cooker hobs sum-
mary - models with traditional built-
in [ Page 182 ], in correspondence of the
drawing of the purchased cooker hob.
A B
Fig. 2: cutting the hole for the built-in