Foster Gas Cooker Hobs 9606801 - Manual (Page 16)

34
ENGLISH
USER INSTRUCTIONS
It is mandatory to have an earth connection as per modes foreseen in the electrical
system safety standards.
• If using a fixed connection, it is necessary to pre-set an omnipolar interruption
device on the appliance power supply line with a contacts distance that is equal
to or greater than 3 mm, located in a position that can be reached easily and is in
proximity of the appliance.
• If using a connection with a plug and socket, verify that they are of the same type.
Avoid using reducers, adaptors or diverters because they may cause
overheating or burns.
IMPORTANT: The manufacturer declines any liability for damages to persons or
property, caused by the non observance of the following regulations or resulting from
tampering with even a single part of the appliance.
14. Cooker hob use
14.1 Lighting the burners
Before lighting hob burners, make sure
that the flame spreading crowns are po-
sitioned in their seat with the respective
caps.
parallel and centred
tilted
not centred
tilted
Fig. 9: crown position
The new burners called "Series III" are assem-
bled on certain cooker hobs. The lock system
between cover (B) and flame spreading (A)
guarantees perfect positioning and large
cleaning ability.
Fig. 10: positioning of the series III burner