FUJITSU V810 - Manual (Page 51)

System expansions
A26361-K680-Z122-1-7619, Edition 1 43
Changing the floppy disk drive
► Open the casing (see "Opening the casing" chapter).
► Remove the front (see "Removing the front panel" chapter).
► Disconnect the cables connected to the floppy disk drive.
► If it is present, pull the cable of the front USB or USB-audio interface from the mainboard (see
also the technical manual for the mainboard).
Removing the floppy disk drive
1 2
► Loosen the screws (1).
► Pull the slide-in module out of the casing (2).