FUJITSU V810 User Manual
Page 58
System expansions
50
A26361-K680-Z122-1-7619, Edition 1
►
Push the SmartCard reader as far as
possible into the casing in the direction of
the arrow.
►
Attach the SmartCard reader cable to the mainboard connector (see the technical manual for
the mainboard).
►
Attach the front panel (see "Attaching the front panel" chapter).
►
Close the casing (see "Closing the casing" chapter).
Removing a SmartCard reader
►
Open the casing (see "Opening the casing" chapter).
►
Remove the front (see "Removing the front panel" chapter).
►
Disconnect the plug of the SmartCard data cable from the mainboard (see the technical
manual for the mainboard).
►
Pull the SmartCard reader out of the casing in the direction of the arrow (1) (see "Installing a
SmartCard reader" chapter).
2
1
1
►
Loosen the screws (1).
►
Pull the SmartCard reader out of the
carrier in the direction of the arrow (2).
►
If you do not want to install a new SmartCard reader, push the slide-in module into the casing
again (see "Installing a SmartCard reader" chapter).
►
Attach the front panel (see "Attaching the front panel" chapter).
►
Close the casing (see "Closing the casing" chapter).