FUJITSU V810 - Manual (Page 52)

System expansions
44 A26361-K680-Z122-1-7619, Edition 1
1
1
2
► Remove the screws (1) on both sides of the drive.
► Pull the disk drive out of the slide-in module (2).
Installing the floppy disk drive
► Take the new floppy disk drive out of its packaging.
2
1
2
► If necessary, feed the cables for the USB or USB audio ports through the slide-in module slot
into the inside of the unit.
► Slide the floppy disk drive into the slide-in module (1).
► Fasten the floppy disk drive with the screws (2) on both sides of the drive.