FUJITSU V810 - Manual (Page 62)

System expansions
54 A26361-K680-Z122-1-7619, Edition 1
1
2
► Remove the screw (1) and then remove the USB or USB-audio interface (2).
2 1
► Slide the floppy disk drive into the slide-in module (1).
► Fasten the floppy disk drive with the screws (2) on both sides of the drive.
► Fit the data and power supply connectors to the floppy disk drive.
► Remove the ports frame for the USB or USB audio ports from the front panel.
► Insert the blanking plate for the USB or USB audio ports into the front panel.
► Attach the front panel (see "Attaching the front panel" chapter).
► Close the casing (see "Closing the casing" chapter).