Connecting the monitor – FUJITSU V810 User Manual
Page 15
Preparing for use
A26361-K680-Z122-1-7619, Edition 1
7
Connecting the monitor
►
Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
►
Plug the data cable into the monitor port
of the workstation.
►
Depending on the connector, plug the monitor power cable into either the monitor socket of the
workstation (1) or the grounded mains outlet (2).
i
We recommend to connect the monitor power cable to the monitor socket of the
workstation. The monitor is then switched off automatically when you switch the
workstation off.
!
The monitor power cable may only be connected to the monitor socket if the monitor
current consumption is smaller than 1,5 A with 230 V or 3 A with 115 V. The values for the
monitor current consumption can be found in the technical data on the monitor or in the
operating manual for the monitor.
2
1
i
The monitor will not be switched off together with the system. Switch off the monitor with
ist own ON/OFF switch.